Ingress Protection Test Equipment

Water Ingress Protection Test Equipment IPX3 IPX4 Oscillating Tube Testing Equipment

Water Ingress Protection Test Equipment IPX3 IPX4 Oscillating Tube Testing Equipment

  • Model:

Oscillating Tube Tester for IPX3 and IPX4 HH0802

 

 

Description:

This is to testing of IPX3 and IPX4 protection aginst water of electronic appliances, lamps, electrical cabinets, electrical components, car, motorcycle, electrical products. 

Confirm to standards:

IEC 60529 IPX3, IPX4; 

EN 60529 IPX3, IPX4;

IEC 60884-1;

IEC 60598-1;

IEC 60335-1 and so on.

 

Test sample:  The test apparatus with water proof functions, such as electronic appliances, lamps, electrical cabinets, electrical components, car, motorcycle, electrical products (such as automotive instrument, all kinds of switches, micro motors, etc.).

 

Feature: 

There are two models: Open type and chamber type. Using PLC control, motor drive oscillating tube to do the reciprocating motion at a certain angle, at the same time control the water flow, the turntable rotates at a certain speed, so that to make every side of the sample testing uniformly.

 

Technical parameters:

ModelHH0802
Power supplySingle-phase AC220V 50Hz or customize
Water supplyWater flow rate>10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit
Control and operationPLC intelligent control, 7 inch color touch screen operation
The size of the oscillating tube

R400. R200, R600, R800, R1000, R1200, R1400, R1600mm. Optional, stainless steel

Needle holeΦ0.4mm
Included angle of two holesIPX3: 120°; IPX4: 180°
Swing angle

IPX3: 120°(±60°) ;

IPX4: 350°(±175°)

Swing speed

IPX3: 4 s/time(2×120°) ;

IPX4: 12 s/time(2×350°) ;
Water flow1-10L/min adjustable
Testing time0.01S~99hours 59min, can be preset
Rotary plate

Diameter: Φ600mm; Rotate speed:1r/min.

Can be paused at four aspects, Load bearing≤50kg, electrical equipment
Pressure gauge0~0.25MPa
Site requirements

Dedicated IP waterproof test room, The ground should be flat with illumination

10A waterproof leakage switch(or socket) used for equipment. With good function of inflow and drainage. Ground installation
Area coveredIt is set according to the selected oscillating tube

 


Tag:

Oscillating Tube Tester for IPX3 and IPX4 HH0802

 

 

Description:

This is to testing of IPX3 and IPX4 protection aginst water of electronic appliances, lamps, electrical cabinets, electrical components, car, motorcycle, electrical products. 

Confirm to standards:

IEC 60529 IPX3, IPX4; 

EN 60529 IPX3, IPX4;

IEC 60884-1;

IEC 60598-1;

IEC 60335-1 and so on.

 

Test sample:  The test apparatus with water proof functions, such as electronic appliances, lamps, electrical cabinets, electrical components, car, motorcycle, electrical products (such as automotive instrument, all kinds of switches, micro motors, etc.).

 

Feature: 

There are two models: Open type and chamber type. Using PLC control, motor drive oscillating tube to do the reciprocating motion at a certain angle, at the same time control the water flow, the turntable rotates at a certain speed, so that to make every side of the sample testing uniformly.

 

Technical parameters:

ModelHH0802
Power supplySingle-phase AC220V 50Hz or customize
Water supplyWater flow rate>10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit
Control and operationPLC intelligent control, 7 inch color touch screen operation
The size of the oscillating tube

R400. R200, R600, R800, R1000, R1200, R1400, R1600mm. Optional, stainless steel

Needle holeΦ0.4mm
Included angle of two holesIPX3: 120°; IPX4: 180°
Swing angle

IPX3: 120°(±60°) ;

IPX4: 350°(±175°)

Swing speed

IPX3: 4 s/time(2×120°) ;

IPX4: 12 s/time(2×350°) ;
Water flow1-10L/min adjustable
Testing time0.01S~99hours 59min, can be preset
Rotary plate

Diameter: Φ600mm; Rotate speed:1r/min.

Can be paused at four aspects, Load bearing≤50kg, electrical equipment
Pressure gauge0~0.25MPa
Site requirements

Dedicated IP waterproof test room, The ground should be flat with illumination

10A waterproof leakage switch(or socket) used for equipment. With good function of inflow and drainage. Ground installation
Area coveredIt is set according to the selected oscillating tube