Battery Testing Equipment

Vertical Extrusion Battery Crush Nail Penetration Testing Equipment 1~20KN Computer Control

Vertical Extrusion Battery Crush Nail Penetration Testing Equipment 1~20KN Computer Control

  • Model:

SN/T 1414.1-2004 Computer Type Battery Crush Nail Penetration Tester

 

Computer Type Battery Crush Nail Penetration Tester Conform SN/T 1414.1-2004 To Simulate Crush Conditions Of 1~20KN

 

Standard

The Computer Type Battery Crush Nail Penetration Tester is conforms to the IEC 60086-4:2000 UL1642, SN/T 1414.1-2004,SN/T 1414.3-2004, SJ/T 11169-1998, YD 1268- 2003, SJ/T 11170-1998, IEC62133-2012, UN 38.3, MT/T 1051-2007.

 

Application

This Battery Crush Nail Penetration Test Machine is designed to simulate actual using environments for the lithium battery such as battery in crush and feedback the various results in different crushing conditions.

Principle

Battery is placed between two crushing boards, The motor drives the screw to transmit the crushing force onto battery. The screw returns if a pre-set force value reached ,or voltage

dropped to a pre-set value, or the battery deformed then repeat a cycle between periodic crushing and return.

Technical Parameters

 

Force Range1~20KN
Tester ArchitectureFree Stand & Vertical extrusion
Power Input220V 50 Hz( can custom by client)
Force Deviation≤±1% Full-scale Range
Unit ShiftKgf,lbf,n,kn,kpa,mpa
Crushing Velocity1~ 900mm/min(controllable)
Crushing Velocity Accuracy≤±0.5% Full-scale Range
Crushing Travel300mm
Crushing Motion Accuracy≤±1% Full-scale Range
Available Battery SizeW400 X D400 X H300mm
Voltage-Reducing Controlling MethodThe pressing plate returns or returns after crushing force continues for a fixed time if voltage drops into a fixed value.
Crushing ForceThe pressing plate returns or return after crushing force continues within pre-set time if pressing force reach set value.
Displacement ControlAfter paused in a period if the pressing tray down to predesigned position , pressing tray will continue second displacement and pause, by repeating such a working mode till to final displacement and pressing tray return after a period maintaining.
Emergency ButtonThis crushing tester designed with Emergency stop function
Voltage Resolution1mv
Test TermsForce, Displacement (Deformation), Voltage, one from three projects or all three projects
Crushing Time Maintaining0~99 Hours 99 Minutes & 99 seconds, time can be controllable to control the deformation and stop if test fulfilled.
Industrial CommunicationComputer Control,ensure stability and real-time of remote sampling, with explosion-proof function, all data can be store and print through computer with Excel format.
Driving MethodServo Motor Driving
Nail Penetration Speed1 ~ 40mm/s(Controllable)
Tungsten steel needleΦ3X100MM*10 pieces, Φ4X100MM**10 pieces, Φ6X100MM*10 pieces, Φ8X100MM*10 pieces
Machine DimensionAbout 1020W X 600D X 1900H mm
Computer ControlAbout 700W X 600D X 1300H mm

 

Software Interface: