Test Finger Probe

Scratch Resistant Pin Electric Safety Testing Probes IEC60335-1 clause 21

Scratch Resistant Pin Electric Safety Testing Probes IEC60335-1 clause 21

  • Model:

Scratched Pin Electric Safety Testing Probes

 

 

Product information:

The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21.

Test method: make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch the surface of the sample at a speed of approximately 20mm/s. This test pin can be equipped with 20N weight to reach the load of 30N.This scratched pin shall be used with resistance scratching tester.

 

Standard:IEC60335-1 clause 21 and IEC60950-1.

 

Application:The test pin is used to do the scratch resistant test of the electrical solid insulation surface.

 

Test sample:Home appliance fixed insulation accessible part and coated printed board.

 

Feature:Test method: make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch the surface of the sample at a speed of approximately 20mm/s. This test pin can be equipped with 20N weight to reach the load of 30N.This scratched pin shall be used with resistance scratching tester.

 

Technical parameters:

ModelHT-I34
Pin headA cone with the angle of 40°
Tip is rounded with a radius0.25mm±0.02mm
Mass10±0.5N
MaterialQuenched steel

 

About us :

 

HongCe Equipment Co., Ltd is a leading company in inspection equipment industry, established in 2003 and located in Guangdong, China. Our company introduced advanced equipment, combined with the most advanced technology production processes, strict quality control system to control the entire process of production. The company combined with a number of high-tech management personnel and advanced equipment, and together with the modern management, computer design and control, our products has reached the international advanced level. The company set R&D design, production, sales as one, specializing in producing electric wire inspection equipment of plug and socket, mechanical robustness testing equipment of electronics, inspection equipment of electronics’ on-fire danger, testing indicator of anti-electric shock and solid objects' entry, general inspection equipment, and other non-standard testing equipment. Our products enhance good selling at home and abroad, and have established supply relationships with a number of well-known companies.