Ingress Protection Test Equipment

IP4X 1.0mm Wire Ingress Protection Test Equipment Against Access To Hazardous Parts

IP4X 1.0mm Wire Ingress Protection Test Equipment Against Access To Hazardous Parts

  • Model:

Test Wire Probe D HT-I04

 

 

Description:

This wire probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.

Confirm to standards:

IEC 60529 IP4X; 

EN 60529 IP4X;

IEC 61032-1 Figure 4;

IEC 60065 and so on.

 

Test sample: Easily accessible enclosure live parts or mechanical parts.

 

Feature: It can be used for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .The probe whose model number is with "T" is with force.

 

Technical parameters:

ModelHT-I04HT-I04T
NameTest rod probe DTest rod probe D with force
Probe diameter1.0mm1.0mm
Shpere diameter35mm35mm
Handle diameter10mm10mm
Handle length100mm-
Test force-With force of 1N
Applied standardIEC 61032-1IEC 60529