Ingress Protection Test Equipment

IEC 60529 Ingress Protection Test Equipment IP2X Test 12mm Jointed Test Finger

IEC 60529 Ingress Protection Test Equipment IP2X Test 12mm Jointed Test Finger

  • Model:

Test Finger Probe B HT-I02

 

 

Description:

This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger.

Confirm to standards:

IEC 60529 IP2X; 

EN 60529 IP2X;

IEC 61032 Figure 2;

IEC 60950 Figure 2A;

IEC 60884-1;

IEC 60335;

UL507, UL1278 figure 8.4 and so on.

 

Test sample: Easily accessible enclosure live parts or mechanical parts.

 

Feature: This test finger probe consists of dito, finger, base and insulated handle which simulates the characteristics of the human hand. It has two movable joints, which can be curved at 90°. Customizable: it can be used for anti-electric shock test when equipped with pluggable banana plugs and amphenol connector at the end of the handle , or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer).

 

Technical parameters:

ModelHT-I02HT-I02AHT-I02BHT-I02T
NameStandard Test FingerCircular Baffle Test fingerLarge Baffle Test FingerStandard Test Finger With Force
Joint 130mm30mm30mm30mm
Joint 260mm60mm60mm60mm
Finger length80mm80mm100mm80mm
Fingertip to baffle180mm180mm-180mm
CylindricalR2R2R2R2
SphericalR4R4R4R4
Fingertip cutting bevel angle37 degree37 degree37 degree37 degree
Fingertip taper14 degree14 degree14 degree14 degree
Test finger diameter12mm12mm12mm12mm
A-A Section diameter50mm50mm-50mm
A-A Section width20mm--20mm
Baffle diameter75mm75mm125mm75mm
Baffle thickness5mm5mm-5mm
Force---With force of 10N, 20N,30N
Applied standardIEC 61032-1IEC 60335-1IEC 60335-2-14IEC 60529-1