Ingress Protection Test Equipment

IEC 60529 IPX9 IP Code 9K Ingress Protection IEC Test Equipment for Auto Parts

IEC 60529 IPX9 IP Code 9K Ingress Protection IEC Test Equipment for Auto Parts

  • Model:

IPX9 Ingress Waterproof Testing Equipment IPX9K Test Chmber For Electrical And Auto Parts

 

Products Introduction:

 

The test apparatus is designed and manufactured according to clause 14.2.9 of IEC EN 60529 2013 Edition 2.2 , DIN40050-9, ISO 20653-2006, ISO30653-2006, clause 4.9.2of QC/T 417.1-200, clause 6.2.7 and 6.2.8 of TOYOTA ENGINEERING STANDARD TSC1000G. It is applicable for waterproof testing of the electrical and auto parts under high temperature and high pressure.


The equipment is consists of heating water tank, high pressure plunger pump, high pressure solenoid valve, fan nozzle, turntable and so on. Firstly, heat the water in the water storage tank to required temperature, secondly, mount the sample on the turntable, adjust the position of the nozzle, thirdly, close the protective door of the test equipment, set all test required parameters, finally, start the test. The four nozzles spray for 30 seconds in order during the test.

 

Technical parameters:

 

ItemParameters
Working Volume1m³
Test Water Temperature80±5 ℃
Spray Pressure8Mpa~10Mpa (adjustable)
Spray Flow14L/min~16L/min (change according to pressure)
Nozzle Number4 (0°,30°,60°,90°)
Nozzle SizeAccording to standard graphics, meet standards
Nozzle rotating speed23 RPM
Spray Distance100~150mm (adjustable)
Nozzle Spay Time0-99,9s(can be set)
Spray SequenceAutomatically switch by sequence
Sample Support Platformφ400mm
Sample Support Platform Speed0-17r/min (Stepless speed regulation)
Sample Support Platform Lift300mm~400mm (Manually)
Sample Support Platform Bearing≤15kg
Tank Volume50L
Test WaterRecycling
Flow MeterCan be disassembled
Power Supply For Test SampleProvide interface for test product, 4 core wire power supply, the maximum 30A
MaterialThe frame material is the industrial shaped aluminum, and the inner shell material is SUS304 stainless steel plate
Control ModePLC controller + touch screen control, inverter adjust water pressure

 

 

 

HongCe has a large range of test equipment for Degrees of protection provided by enclosures (IP Code), our waterproof degrees test equipment and system meet the requirements of all demostic and international standards:

CEI IEC 60529 / GB 4208 Degrees of protection provided by enclosures (IP Code)
CEI IEC 60068-2-11 / GB/T 2423.17 Basic environmental testing procedures – Part 2-11: Tests – Test Ka: Salt mist
IEC 60068-2-1 / GB/T 2423.1 Environmental testing – Part 2-1: Tests – Test A: Cold
CEI IEC 60068-2-2 / GB/T 2423.2 Environmental testing – Part 2-2: Tests – Test B: Dry heat
IEC 60068-2-78 / GB/T 2423.3 Environmental testing – Part 2-78: Tests- Test Cab: Damp heat, steady state
UL 1598 Luminaires

UL 50 Enclosures for Electrical Equipment, Non-Environmental Considerations