Ingress Protection Test Equipment

IEC60529 IPX5 IPX6 Handheld Water Jet Nozzles Dia 6.3mm / 12.5mm

IEC60529 IPX5 IPX6 Handheld Water Jet Nozzles Dia 6.3mm / 12.5mm

  • Model:

IEC60529 IPX5 IPX6 Handheld Jet Nozzle Diameter 6.3mm / 12.5mm

 

 

Product information:

 

The jet nozzle is designed and manufactured in accordance with IEC60529 clause IPX5 and IPX6. It is used for the waterproof test of the electric appliance.

 

Test for second charateristic numeral 5 with the 6.3 mm nozzle
The test is made by spraying the enclosure from all practicable directions with a stream of water from a standard test nozzle as shown in figure 6.
The conditions to be observed are as follows:
Internal diameter of the nozzle:6.3 mm;
Delivery rate:12.5 L/min±5%;
Water pressure: to be adjusted achieve the specified delivery rate;
Core of the substantial stream: circle of approximately 40 mm diameter at 2.5 m distance from nozzle;
Test duration per square metre of enclosure surface area likely to be sprayed:1 min;
Minimum test duration: 3 min;
Distance from nozzle to enclosure surface: between 2.5 m and 3 m.

 

Test for second characteristic numeral 6 with the 12.5 mm nozzle
The test is made by spraying the enclosure from all practicable directions with a stream of water from a standard test nozzle as shown in figure 6.
The conditions to be observed are as follows:
Internal diameter of the nozzle:12.5 mm;
Delivery rate: 100 I/min ±5%;
Water pressure: to be adjusted to achieve the specified delivery rate;
Core of the substantial stream: circle of approximately 120 mm diameter at 2.5 m distance from nozzle;
Test duration per square metre of enclosure surface area likely to be sprayed: 1 min;
Minimum test duration: 3 min;
Distance from nozzle to enclosure surface: between 2.5 m and 3 m.

 

Technical parameters:

 

 

No.

Item

IPX5

IPX6

1

Water supply

Water flow rate > 12.5L/min±5% clean water without inclusion.

It can be achieved by the stainless steel water tank and pressurized equipment

Water flow rate >100L/min±5% clean water without inclusion.

It can be achieved by the stainless steel water tank and pressurized equipment

2

The nozzle diameter

Ф6.3mm

Ф12.5mm

3

Water flow

12.5±0.625L/min,Flow meter is adjustable

100±5 L/min,Flow meter is adjustable

4

The distance from jet nozzle to enclosure

2.5~3m

2.5~3m

5

Testing time

Not less than 1min/m²(not less than 3 mins)

Not less than 1min/m²(not less than 3mins)

6

Pressure gauge

0~0.25MPa

0~0.25MPa

7

Site requirements

Dedicated IP waterproof test room whose width is more than 3m,

With good function of inflow and drainage. Wall installation

Dedicated IP waterproof test room whose width is more than 3m,

With good function of inflow and drainage. Wall installation

 

 

 

About us:

 

HongTong Electromechanical Co., Ltd is a leading company in inspection equipment industry, established in 2003 and located in Guangdong, China. Our company introduced advanced equipment, combined with the most advanced technology production processes, strict quality control system to control the entire process of production. The company combined with a number of high-tech management personnel and advanced equipment, and together with the modern management, computer design and control, our products has reached the international advanced level. The company set R&D design, production, sales as one, specializing in producing electric wire inspection equipment of plug and socket, mechanical robustness testing equipment of electronics, inspection equipment of electronics’ on-fire danger, testing indicator of anti-electric shock and solid objects' entry, general inspection equipment, and other non-standard testing equipment. Our products enhance good selling at home and abroad, and have established supply relationships with a number of well-known companies.