Ingress Protection Test Equipment

IEC60529 Fig 2 Ingress Protection Test Equipment / IP5 IP6 Sand and Dust Environmental Test Chamber

IEC60529 Fig 2 Ingress Protection Test Equipment / IP5 IP6 Sand and Dust Environmental Test Chamber

  • Model:

IP5 IP6 Sand and Dust Environmental Test Chamber For Enclosure Protection

 

 

Standard :

  • IEC60529-2001: Degrees of protection provided by enclosure (IP code), Fig 2

  • IEC60598-1-2008 and etc.

Principle and Structure

 

The test device is suitable for electrical products’ sand and dust test of first characteristic numeral 5 and 6 (IP5 and IP6). It is used to test sealing parts and enclosure’s sand and dust resistance capacity of the electrical and electronic products, car and motorcycles spare parts and seals. In order to detect the use, storage, transport performance of the electrical and electronic products, car and motorcycles spare parts and seals under the sand and dust environment.

This sand and dust test chamber is the same as the requirements of IEC60529-2001. It is with an addition of flow heating device, in order to work under low ambient temperature and heavy humidity conditions. Firstly, put the standard dry talc ( 2kg / m³ ) into the test chamber, then put the sample into the test chamber, after that, start the fan, to achieve a high density dust cloud in the test chamber, until reach to the set running time (generally 8h).

 

Chamber Features : 

  • A non-laminar flow of dust-loaded vertically circulating air

  • With a vacuum pump

  •  The exhaust volume and pressure can be adjusted.

  • A airflow temperature control device

 

Parameters :

 

Device NameDust and Sand Test Chamber

 

Main configuration

CabinetEnclosure materialA3 plate electrostatic spraying
Inner materialSUS304B Stainless steel
Lead holeIt is for test sample's power cord to be connected to the external power supply
Observation windowlarge observation window in the middle of the door
Electrical control systemController

PLC Control:

A. blowing dust time (stop, blowing) can be adjusted

B. Cycle: arbitrary adjustable

C. Preset test time: 0.1H-9999.9H arbitrary adjustable

D. Power: On-off- On

E. There are accumulating function and power-off protection function

 

Vacuum systemEquipped with a vacuum pump, pressure gauge, air filter, pressure regulator, connecting pipe

Security

Protection

Device

Power overload, short-circuit protection
Ground Protection
Voltage Protection
Motor phase loss protection
Alarm beep prompt
 

 

 

 

Picture For Reference: