IEC Test Equipment

IEC60335-2-17 Programmable Temperature Humidity Chamber PTH-1000 (150L) ,-40 ℃~ +150 ℃,20 %RH~ 98 %RH

IEC60335-2-17 Programmable Temperature Humidity Chamber PTH-1000 (150L) ,-40 ℃~ +150 ℃,20 %RH~ 98 %RH

  • Model:

IEC 60335 Programmable Temperature Humidity Chamber PTH-1000 (150L) ,-40 ℃~ +150 ℃,

20 %RH~ 98 %RH

 

 

Standard

 

IEC60335-2-17, Clause 21.110.3, Clause 21.111.2.

 

Application

 

It is used to process the aging test for the blanket’s flexible fabric parts.

 

Test sample

 

Blanket’s flexible fabric parts.

 

Feature

 

Box type

 

Parameters

 

Product NameProgrammable Temperature Humidity Chamber
Volume, size and weight
Working Volume150L (can be customized)
Inner sizeW500mm × H600mm × D500mm
Outer sizeW1020mm × H1000mm × D1460mm
Weight300KG
Performance
Test environmental conditionsEnvironmental temperature +5~+28℃, relative humidity≤85%, under the condition that no sample inside the test chamber
Test methodAccording to IEC60068-2, IEC60598-1
Temperature range-40℃~+150℃
Temperature control precision±0.2℃
Humidity control precision±2.5% RH
Temperature uniformity±2℃
Humidity uniformity±3.0% RH
Heating up time3℃/min (Average heating up rate)
Cooling down time1℃/min (Average cooling down rate)

 

*Note: Please refer to below humidity use range chart!

 

4. Temperature and humidity control accuracy: ±0.2℃; ±2.5%RH.

* To guarantee above 2~4 performance, should be measured 30 minutes after the temperature sensing measurements is stable!

 

5. Temperature and humidity distribution uniformity: ±2℃; ±3%RH.

*Note: To guarantee below 6~11 performance, the measuring positions should be each wall’s 1/6 positions of the test zone, and should be measured 30 minutes after the temperature is stable!

 

6. Heating time: Heating from the room temperature to 150℃, the total heating time is 50 mins (under non-load state).

 

7. Cooling time: Cooling from the room temperature to -40℃, the total cooling time is 40mins (under non-load state).

 

8. Inner chamber dimensions: test area: 50×60×50cm(W×H×D).

*Note: The volume of placing samples should not exceed 2/3 of the capacity of the test zone.

 

9. Equipment installation space: at least 920×1600×870cm(W×H×D).

 

10. Test chamber door: 80 × 105 cm(W×H), total 1.

 

11. Power source: AC 1220 V 50 Hz MAX 40 A

 

Picture for reference