Cord Anchorage Strain and Twisting Tester HJ0609
This device is used to check the cord anchorage of the appliances provided with a supply cord, and appliances intended to be permanently connected to fixed wiring by a flexible cord, shall relieve conductors from strain, including twisting, at the terminals and protect the insulation of the conductors from abrasion.
According to the standard Clause 25.15 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements and etc.
Test sample: Household appliances, medical equipment, lamps, plugs and sockets and etc
Feature: The test equipment adopts Z-word structure, can be used to test the clamping terminal firmness of the refrigerators, washing machines and other large household appliances’ power cords.
The test method is that a mark is made on the cord at a distance of approximately 20 mm from the cord anchorage or other suitable point. Then the cord is then pulled, without jerking, for 1 s in the most unfavourable direction with the force specified. The test is carried out 25 times. The cord, unless on an automatic cord reel, is then subjected to a torque that is applied for 1 min. After above test, the cord shall not be longitudinally displaced by more than 2 mm.
|Power supply||AC 220V 50Hz|
|Pull Force Weight||20N*2,30N*2 (the pulling force of 30N,60N,80N,100N can be achieved)|
|Torque Weight||5N*1, 12.5N*1, 17.5N*1 and a torque arm (0.1Nm,0.25Nm,0.35Nm can be achieved)|
|Pull Test Cycles||0~999999, can be preset, default 25|
|Pull Speed||1 cycles/s|
|Torque Time||0.01S～99 hour 59 min 59 s|
Tension fixture and torque fixture are combined, which coordinated in the middle through the bearing, reduce the friction during torque test.
|Structure||The device adopts motor cam mandrel mechanism, Z-word connection, so that the fixture can hold the power cord which is on the appliance and 150mm above from the ground.|
|Temperature Alarm||0～200℃ Adjustable|
|Temperature Control||Intelligent control|
|Temperature Display||Thermometer display|
|Material||Inside chamber is made of stainless steel and outer chamber is made of electrostatic spraying steel plate|
Table – Pull force and torque.
|Mass of appliance (kg)||Pull force (N)||Torque (Nm)||Combination of Pull Force Weight and Torque Weight|
|> 1 and ≤4||60||0.25||2*30N+12.5N|
|> 4||100||0.35||2*30N +2*20N+17.5N|
About us :
HongCe Equipment Co., Ltd is a leading company in inspection equipment industry, established in 2003 and located in Guangdong, China. Our company introduced advanced equipment, combined with the most advanced technology production processes, strict quality control system to control the entire process of production. The company combined with a number of high-tech management personnel and advanced equipment, and together with the modern management, computer design and control, our products has reached the international advanced level. The company set R&D design, production, sales as one, specializing in producing electric wire inspection equipment of plug and socket, mechanical robustness testing equipment of electronics, inspection equipment of electronics’ on-fire danger, testing indicator of anti-electric shock and solid objects' entry, general inspection equipment, and other non-standard testing equipment. Our products enhance good selling at home and abroad, and have established supply relationships with a number of well-known companies.