Electrical Appliance Tester

220V Label Marking Abrasion 1 Station IEC60730-1 Figure 8 Test Machine

220V Label Marking Abrasion 1 Station IEC60730-1 Figure 8 Test Machine

  • Model:

220V Label Marking Abrasion 1 Station IEC60730-1 Figure 8 Test Machine

Production introduction:

 

This testing apparatus is design and manufactured according to IEC60730-1 standard figure 8 and annex A requirements, used for testing the controller marking durability performance.

The apparatus comply with the dimensions requirements of IEC 60730-1 Figure 8. Test times can be set from 1 to 999999 (default as 12 times), test rate 48 rpm. It is a easy operated professional equipment.

 

Main technical parameters:

 

EquipmentMarkings durability tester
Test station1 station
Test stroke20mm
Test rate48rpm
Test times1~999999, default as 12times
Sliding weight500g. Strip weight 250g, with weight 750g
Brass washerΦ60*2.5mm
Friction wheelΦ65*7.5mm
Power supply220VAC 50Hz
StandardIEC 60730-1 Figure 8, Annex A

 

Test Operation

  1. Test Preparation: Insert the power supply ,turn on the power supply switch ,preset the test times as 12 times .

  2. Select the corresponding weight to install the sample. 

  3. Press start button , the device reciprocates at a rate of 48 rpm and a stroke of 20mm ,it will be automatically stop when reaches the test times .The stop button lights and sound an alarm .

Presetting and parameters of instrument

Counter/Timer: Press down [MD] for three seconds to enter setting state→ the display mode is[IN]→press ▲or ▼to select [U]mode →repress [MD]→the display mode is [CPS]→press ▲ or ▼to select [30]→this analogy→ finally press down [MD]for three seconds to complete the setting procedure. Press<left arrow to select the figures,and then press ▲upward or ▼downward to select the required number,and then press[MD] to confirm it. For the setting method in detail, please refer to the detailed instructions to the setting of various parameters.
Counter
Input mode INU
Input logic SGPNP
Counting speed CPS30Resetting time RST20
Output mode OUTFCounting/Timer C-TCOUN
Output time OUT.THOLD